Peristaltic Hose Pump for TBM

Description

Application

Features

Technical data

■ Description

♦ GH89-610C Peristaltic Hose Pump for TBM is a kind of peristaltic pump, which is suitable for handling aggressive, high viscosity, high density products, such as abrasive slurry, corrosive acids, gaseous liquids, sand/cement mortar, liquid accelerator, etc. Peristaltic Hose Pump also is used for dosing pump with 1% repeat precision. It consists mainly of pump house, rotor, roller, idle roller, squeeze tube and driving unit. The squeeze hose is U-shape in pump house, when rotor drives roller to rotate, hose is deformed. After the roller rotate, the deformed hose recover by its elasticity. Thus the negative pressure in this hose is generated, sucking slurries, and discharging through outlet under roller’s push, finally forms pressure conveying of slurries.

♦ High efficiency GH89-610C Peristaltic Hose Pump for TBM is absorbing the advanced technology of foreign countries and developing a new type of multi-functional and multi-functional industrial pump. It is completely separated from the operation mode of the impeller and shaft seal of the traditional pump, and has great advantages in viscosity, corrosiveness, impurities in the fluid medium, and the transmission of the medium. The principle adopted is quite different from the traditional pump, and has a wide range of application.

■ Application

♦ GH89-610C Peristaltic Hose Pumps are mainly applied in distant conveying, grouting and dosing of viscous slurries in TBM, construction, mining, food, papermaking, ceramic, etc.

♦ GH89-610C hose pump for TBM can be used in following field: Construction, pharmacy, textile mill, dye making, water treatment, paper making, mining, ceramic, brewery and beverage, underground engineering, etc. It’s perfect to pump corrosive, abrasives, shear sensitive fluids, high viscosity fluids, high density fluids, large solids, metering(±1%), high pressure(3Mpa).GH series industrial hose pump are mainly applied in distant conveying, grouting and dosing of viscous slurries in construction, mining, food, papermaking, ceramic, etc.

Adjustable flow rate peristaltic pump for TBM:

■ Features

♦ No seals
♦ No valves
♦ Self -priming
♦ Only tube to replace
♦ Dry –running without damage
♦ Reversible
♦ No contact between product and mechanical parts
♦ Able to pump products with solid parts inside
♦ Peristaltic pump for TBM is easy maintenance, low-cost, short down time

■ Technical data

Type	GH89-610C Peristaltic Hose Pump for TBM
Max. output	240L/min
Rotation	45RPM
Squeeze hose ID	89mm
Voltage	3 phase, 380V, 50HZ
Power	22KW
Max. pressure	1.0Mpa

We can also customize Peristaltic Hose Pump for TBM according to your project demands.

Inquiry >

Products you need :
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :	Please enter your inquiry