Your position: Home > News

Portable Mixing and Pumping System for Bentonite Slurry

2026-09-30 15:52:26

A portable bentonite mixer and pump must coordinate slurry preparation, storage and delivery. Mixing capacity determines how quickly material can be prepared, while holding volume and pump output determine how that supply reaches the application point. For bentonite, the process must also accommodate the time required to develop the specified slurry properties.

The Gaodetec GGP500/700/100PI-E provides an integrated arrangement for assessing these requirements. For procurement in Mongolia and neighbouring markets, equipment selection should consider both the slurry operating duty and the practical requirements for transport, electrical connection and installation.

bentonite mixing and pumping plant

 

bentonite slurry mixing system


Integrated Mixing, Agitation and Pumping

The station’s published technical table lists a 500 L mixer, a 700 L agitator and a mixing output of 7 m³/h. Prepared slurry transfers from the mixer to the agitator before pumping, allowing batch preparation and delivery to be coordinated.

The pump has a published output range of 0–100 L/min and a pressure range of 0–5 MPa. These ranges describe the equipment’s stated operating envelope; they do not establish that maximum flow and maximum pressure are available simultaneously.

For bentonite service, the published mixing output is a reference value rather than a guaranteed production rate for every formulation. Actual output depends on material charging, concentration, mixing time, transfer time and any required hydration stage.

Bentonite Preparation Requires Dispersion and Hydration

Bentonite powder can form agglomerates when introduced into water. Effective mixing distributes the powder throughout the liquid and exposes the particles to water. As viscosity develops, adequate circulation remains necessary to maintain consistent preparation throughout the batch.

Dispersion and hydration perform different roles. A slurry may appear uniform before it has developed the properties required by the application. The preparation procedure should therefore follow the bentonite supplier’s instructions and the project’s acceptance criteria.

The mixer prepares the material, while the agitator holds slurry between preparation and pumping. Where additional hydration time is required, the operating schedule must provide it. A storage agitator should not automatically be treated as sufficient hydration capacity simply because it is larger than the mixer.

For a bentonite and grout mixing machine handling different materials, each formulation requires its own preparation procedure. Cement-grout water ratios cannot be applied directly as bentonite concentration limits.

portable bentonite mixer and pump

 

portable grout plant


Matching 7 m³/h Mixing Capacity with Pumping Demand

The published maximum pump output of 100 L/min corresponds to 6 m³/h. Numerically, the listed 7 m³/h mixing capacity exceeds this maximum volumetric pumping rate by 1 m³/h.

This comparison provides an initial capacity check, but does not establish continuous bentonite output. The two figures must be assessed under compatible material and operating conditions. A longer preparation cycle, slower material loading or an additional hydration stage can reduce the rate at which usable slurry becomes available.

The 700 L agitator provides a buffer between batch preparation and delivery. Its usable volume accommodates temporary differences between supply and withdrawal, but cannot compensate indefinitely if average preparation falls below pumping demand.

A practical operating plan therefore considers the complete sequence: material charging, dispersion, conditioning where required, transfer and pumping. Continuous supply depends on this sequence as a whole.

Selecting the Pumping Duty for the Slurry

Pump selection should use the required flow at the intended delivery pressure. Bentonite concentration and flow behaviour, together with hose length, internal diameter and elevation, affect the resistance encountered during pumping.

Transferring slurry into an open holding tank is a different operating duty from injecting it into a confined space. The required pressure should reflect the actual application rather than the highest value available from the pump.

The slurry specification should identify the bentonite grade, concentration and any cement or additives. Where a viscosity or other acceptance criterion applies, it should include the measurement method and test conditions. This information provides a clearer basis for equipment assessment than material name alone.

Transport and Site Installation in Mongolia

Portability at this scale means relocating an assembled plant using appropriate handling equipment. It does not imply manual handling or road-towing capability.

Before shipment, the supply documentation should identify packed dimensions, shipping weight, approved lifting arrangements and any separately packed accessories. The installation area must allow access for material loading, operation, cleaning and maintenance.

Electrical compatibility also forms part of deployment planning. Available voltage, frequency and supply capacity should match the ordered configuration, including motor-starting requirements where a generator is used.

For delivery to Mongolia, equipment price, packing, freight and destination services should be defined separately. Production lead time, estimated transit time and warranty terms should be stated in the quotation so that the buyer can evaluate the complete supply arrangement.

bentonite and grout mixing machine


For a Gaodetec quotation, send the slurry specification, required flow and pressure, available electrical supply and delivery requirements to
info@gaodetec.com. Include photographs or a nameplate image when requesting model identification, together with any required hoses, connections or initial spare parts.

Inquiry >>
info@gaodetec.com86-371-55951660
Products you need :
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :
PRODUCT CATEGORIES