GMA750-1500E Grout turbo mixer with agitator is specially design for continuous cement mixing and grouting in ground engineering, underground engineering.
GMA750-1500E Grout turbo mixer with agitator is designed for preparing and holding cement-based grouts for construction, mining, and geotechnical projects. The turbo mixer disperses the grout ingredients, while the separate agitator tank keeps the prepared slurry moving before delivery to a compatible grout pump. This arrangement allows mixing and grout withdrawal to take place in parallel.
Micropile and Pile Base Grouting
Prepares cement grout for micropile installation and pile base treatment. The agitator tank provides a buffer between batch mixing and pumping, helping coordinate slurry preparation with the injection sequence.
Soil Nailing and Ground Anchors
Supplies mixed grout for soil nails, ground anchors, and rock bolts. The mixer and agitator combination supports repeated grout batches for projects involving multiple injection points, such as retaining walls, slopes, and excavation support.
Dam Foundation and Curtain Grouting
Prepares cement-based slurry for foundation consolidation and seepage-control grouting. Separate mixing and holding tanks allow operators to prepare the next batch while the previously mixed grout is supplied to the injection equipment.
Tunnel and Underground Construction
Supports grout preparation for rock reinforcement, ground treatment, and filling cavities behind tunnel linings. The equipment can be incorporated into a grouting system selected for the required slurry formulation, pumping distance, and injection pressure.
Mining and Rock Reinforcement
Provides grout mixing and agitation for underground rock bolting, anchoring, and localized consolidation work. Equipment capacity and layout can be matched to available working space and the grout demand of the installation crew.
Ground Improvement and Void Filling
Prepares suitable cement or cement-bentonite grouts for ground treatment and filling accessible voids. Keeping the grout agitated before pumping helps maintain mixture uniformity during temporary holding.
Geothermal Borehole Grouting
Can be used to prepare compatible cement-bentonite grouts for filling the annular space around geothermal loops. Suitability depends on the specified grout formulation; mixes containing sand or other thermally conductive fillers require confirmation of the mixer’s material-handling capability.
For each application, mixer capacity, agitator volume, and the grout pump should be matched to the grout formulation and required production rate. Injection pressure is provided by the selected grout pump.
