Skid mounted hydroseeder
2022-06-20 17:26:05
Skid mounted hydroseeder is a kind of slope greening grass planting equipment. It mixes grass seeds for greening with soil, peat soil, water-retaining agent, adhesive, fertilizer, etc. The mud pump sprays it on the ground to be sown. Since the mixed slurry contains water-retaining materials and various nutrients to ensure the source of water and other nutrients required for plant growth, plants can grow healthily and quickly to form turf.
Gaode Equipment is a professional manufacturer and supplier of hydroseeder, and a high-tech enterprise integrating R&D, design, production and sales. With more than 20 years of manufacturing experience, our commercial ground sprayers have been exported to many countries.
We can provide you with skid mounted hydroseeder and wheel-type hydroseeder. After continuous reform, innovation and experimentation, Gaodetec hydro seeding machine manufacturers have reformed the structure and main components of the seeding machine, and have innovatively proposed that the hydroseeder can be sprayed. The hydraulic spraying machine for mud has been successfully tested on slopes in various places, which greatly reduces the cost of construction machines, and is widely used for slope greening on medium and low slopes where the spray layer is not too thick. It is named as a guest soil type hydraulic sprayer.
At present, our hydroseeder models include: GHS0353, GHS0683, GHS0883, GHS06100, GHS08100, GHS08100A, GHS13190, GHS15190. The mixing capacity can be divided into 1.2m3, 2m3, 3m3, 6m3, 8m3, 13m3, 15m3.
Gaodetec can provide you with custom hydroseeding services. The customization range is: tank capacity(600gallon-5000gallon), wheels, hose reel, tank material, ladder, engine(Chinese brand engine or Cummins engine).
Today, we will focus on showing our skid mounted hydroseeder, suitable for stone slopes, barbed wire slopes, high slopes, and slopes with larger thickness. It has high efficiency and is suitable for large-scale construction. The lift is 50-110 meters. It can be suitable for all kinds of medium and low slopes, and the lead pipe lift can reach 160 meters.
The hydroseeder is mainly used for road (railway) slope vegetation protection, river bank biological protection and large-scale green space transformation.
1. Before starting work, we need to clean the slope. Generally, tools such as air picks and steel rods are used to remove gravel, pumice, dangerous stones, slopes, etc. cumbersome), roughly flatten the uneven areas so that the planting substrate is even and thick.
2. When using anchors, be sure to pay attention to the selection of anchors. The length of the anchor rod is about 1-2m of the steel bar. Its main function is to fix the slope at two points and facilitate the hanging of the net. If the slope is too steep, you need to hang the beams, because the slope is too large, you need to hang the beams, the wood can be common local wood, the thickness is 3-5 cm thick.
3. Hanging net (barbed wire or three-dimensional net). To build a drainage ditch at the top of the slope, it is best to press the net under the drainage ditch to prevent landslides and theft; leave 20-750px of hanging net at the top of the slope and 500px at the bottom, and fix it with U-shaped nails or iron wires.
4. Spray the substrate mixture. Use a sprayer to spray the base mixture onto the slope. Spraying should be done from the front as far as possible, and should be done from top to bottom, left to right, avoiding upward spraying. Be careful not to leak spray on the convex and concave parts, leaving no dead corners. For the last time, mix the planting soil, pulp or wood fiber, water-retaining agent, adhesive, and grass seed evenly and spray it on the slope with a thickness of about 0.5-25px. In this way, the grass seeds and ingredients are mixed evenly and moisturizing. Promotes germination of grass seeds. If it is a sunny slope and the temperature is high, the dosage of seeds can be increased, and the dosage of water-retaining agent can be increased for moisturizing.
5. After spraying and mixing, cover the non-woven fabric (12-18g/m2), the non-woven fabric made of high molecular polymer covers the slope from top to bottom, which is beneficial to moisturizing and anti-scouring. The density requirement of the non-woven fabric is 15-18g/m2.
6. Maintenance management: The main work is spraying, irrigation, fertilization and pest control.
7. Water spray maintenance Watering is carried out according to the slope humidity and weather conditions. Water generally twice a day to promote germination of shrub grass seeds and whole seedlings. After the seedlings germinate, water once a day. If it doesn't rain, water frequently after spraying to keep the soil moist.
8. Uncover the non-woven fabric. After 10-20 days after spraying, after the plants on the slope surface grow, if the non-woven fabric on the slope surface is not degraded, manually remove the non-woven fabric to facilitate the growth of plants.
PrecautionPest control: Regularly observe the growth of vegetation on the slope. Pest control is a top priority. Spray as soon as it appears.
Seed variety selection: Herbs: Bluegrass, Gao Mao, Purple hair and so on. Shrubs: Huzhizi, Amorpha, etc.
If you want to buy a skid mounted hydroseeder, you can contact us by leaving a message on the website, chatting or emailing us directly, and get quotes, information, videos, etc. Email address: info@gaodetec.com.
